This amazing package deal is suited for medium size homes, containing 1-2 bathrooms and running an average of 3-4 taps at once (30 lpm).

The package includes a pump with electronic controller, whole house triple 10" filter system and filters, and UV System.

There are 2 pump options available and 2 filtration systems available - 4 options in total at 2 price points. 

The pump options are for a lower pressure or a higher pressure pump, and filtration system as separate filter system and UV or Integrated.  Read below for more details.

Pump Option 1:  

CHLF4-40 - Choose this pump if you want more flow and your pump will be situated closer to the house, and or on a flat section. Suitable for Low Pressure Cylinders.

Perfomance:

• Max Discharge 38m Head
• Max Pressure 54 PSI (Equivalent to Mains (low end)
• Max Flow +116LPM
• Max Suction Lift 6m (with Non Return Valve installed - not self priming)

Operation Parameters

• 0.75kW Single Phase Motor
• Liquid Temperature: 0-70 °C
• Maximum Operating Pressure: 10 Bar
• Enclosure Class:  IP55
• Insulation Class:  F
• Duty Rating:  Continuous Duty
• Inlet:  1.25"
• Outlet: 1"

• Bundled with an Italian made Watertech Press Controller for automatic on/off operation. We recommend Controllers are used in simple applications without significant ground elevations where pressure adjustment may be required. We recommend this is installed with a Belkin Surge Protector to protect the controller. You can purchase these here. 

See more about this pump here 

OR Pump Option 2:

CHLF2-60 - Choose this pump if you want more pressure or your pump will be situated further from the house, or you have 2 storeys. Suitable for High Pressure Cylinders. 

• Max Discharge 58m Head
• Max Pressure 81 PSI (Equivalent to Mains)
• Max Flow 80LPM
• Max Suction Life 6m (with Non Return Valve installed - not self priming)

Operation Parameters

• 0.75kW Single Phase Motor
• Liquid Temperature: 0-70 °C
• Maximum Operating Pressure: 10 Bar
• Enclosure Class:  IP55
• Insulation Class:  F
• Duty Rating:  Continuous Duty
• Inlet:  1"
• Outlet: 1"

See more about this pump here

FILTER SYSTEM

There are 2 filter system options available.

Filter Option 1:  

WF-10B3 - This option has the UV as a separate unit, and is the cheaper option.

This system is for whole of house using up to 4 taps at once (including water using appliances - washing machine, dishwasher etc)

Takes a standard 10" jumbo filter, 110mm diameter

• Large capacity housing suitable for high flow applications
• 10″ in length
• Pressure relief/bleed valve on inlet side of cap
• Comes with spanner, mounting bracket and 4 bolts
• Temperature Rating: 2 – 37°C
• Maximum working pressure: 125 psi
• Brass threaded ports
• Made from Food Grade Materials

System includes first set of filters:

• Stage 1:  20 Micron PP Spun Sediment filter
  
• Stage 2:  5 Micron PP Spun Sediment filter
• Stage 3:  CTO Carbon Block filter

See more about this Filter System here

PLUS Ultraviolet Sterilisation System 

Effective environmentally friendly disinfection without chemicals

30W System:  Medium houses using max 2-3 taps at once (24lpm).

Construction

• Chamber: AISI304 Stainless Steel
  
• Chamber Length: 914mm
  
• Ports: 3/4" male threaded
  
• Lamp: 4 pin configuration. Lamp life 6-9000 hrs. Change annually
  
• Lamp Power 30W
• Power Consumption 39W
• Flow:  Maximum 45 Litres Per Minute (16mJ/cm2)
• Nominal Recommended Flow: 24 Litres Per Minute (30mJ/cm2)
• Max Operating Pressure: (145 PSI)
  
• Ambient Temp 2-40C
  
• Audible Alarm on Ballast indicates lamp failure
  
• Visual "Power On" LED
• Chambers are 100% Pressure Tested
• Ballasts are 100% Electrically Tested

Included Accessories:

• Power Ballast, 1.6m cable 3 pin NZ/AUS plug
  
• Chamber
  
• UV Lamp
  
• Quartz Sleeve
  
• O-Rings
  
• Manual
  
• Mounting Brackets
  

Warranty Does not include lamp or ballast failure due to power events. We recommend using Belkin Surge Protectors 

See the 30W System here

OR Filter Option 2:

This option is for the integrated plug and play Triple Jumbo 10" System and UV. Note: This requires substantial bracing suitable for up to 25kg.

Can be configured for Left or Right side Water Entry. 

Specifications

• Council recommended level : 75 LPM (40 mJ/cm2)
• Nominal recommended flow: 94 LPM (30 mJ/cm2)
• Maximum recommended flow: 132 LPM (16 mJ/cm2)
• Inlet and Outlet Port Size: 25mm (1 Inch BSP)
• 1 x 48 watt high intensity lamp
• Temperature range 2-40 degrees
• Max pressure 125 psi
• Dimensions in mm (LxWxH) 755x220x580

Construction

• Quality Stainless Steel housing with cover 
• Fully assembled 48W UV lamp & quartz sleeve
• 3 x 10" Jumbo Big Blue water filter Housing Kits (BB10)
• 1 x 10" Jumbo Pleated 20 micron filter
• 1 x 10" Jumbo Polyspun 1 micron filter
• 1 x 10" Jumbo Carbon 5 micron filter
• 1 x Automatic control ballast with 365 day countdown timer
• 3 x Pressure gauges
• Spanner 

1 Year Manufacturing Defect Warranty.  See Warranty Terms