Problems getting a submersible pump down your bore or well? Declining or fluctuating water table?
A high powered surface mounted deep well pump is therefore the answer...

The pump motor is at the surface. A helical screw is inside a pipe with the pump near the bottom of the well. Pump suction is equal to length of pipe

The hose end must sit 3m from the bottom of the well to ensure it does not suck up dirt & debris. Therefore hose may need to be shortened. It's easy to do: see our You Tube Video
The hose pipe must not get creased or kinked which will reduce pressure & potentially crack the hose pipe over time

The pump has an anti freeze function so when the pump is powered off, there is no water inside the pump or pipe, therefore it will not crack in freezing temperatures


0.75kW single phase motor
Max diameter of hose is 42mm. Well diameter must be larger than 50mm
Water pH 6.5-8.5
Chlorine ion content in water = or less than 400mg/L
Max ambient temp 40C
Comes with hose - Choose from 25m or 45m length. Hose length can also be reduced. See our You Tube video here

Max head 90m
Max flow 32lpm
Mid duty 23lpm at 50m head