Reliable, quiet water circulation for heating and hot water systems.

The UPS20-60 is a compact, three-speed circulation pump designed to move water through domestic heating and suitable hot water circulation systems.

Ideal for smaller installations, it can be used in both open and closed systems, including underfloor heating, solar heating and one- or two-pipe heating arrangements.

Its canned-rotor design combines the pump and motor into a single unit without a conventional shaft seal. The bearings are lubricated by the pumped liquid, helping deliver quiet, low-maintenance operation.

With three selectable speeds, the UPS20-60 allows circulation performance to be adjusted to suit the system's requirements.

Features

• Three selectable operating speeds
• Suitable for open and closed circulation systems
• Ideal for underfloor heating, solar heating and domestic heating circuits
• Canned-rotor design without a conventional shaft seal
• Liquid-lubricated bearings
• Quiet, energy-efficient operation
• Corrosion-resistant stainless steel pump housing
• Maintenance-free design
• Compact 130 mm port-to-port dimension
• Continuous-duty rated

Specifications

• Model: UPS20-60
• Motor Power – Speed 1: 46 W
• Motor Power – Speed 2: 90 W
• Motor Power – Speed 3: 100 W
• Voltage: 220–240 V
• Phase: Single phase
• Connections: 25 mm with 20 mm unions
• Port-to-Port Length: 130 mm
• Liquid Temperature: 0–110°C
• Maximum Ambient Temperature: 40°C
• Maximum Operating Pressure: 10 bar
• Protection Rating: IP42
• Insulation Class: F
• Duty Rating: Continuous
• Warranty: 1 Year Manufacturer's Warranty

Frequently Asked Questions

What is the UPS20-60 used for?

The UPS20-60 circulates water through heating and suitable hot water systems, including underfloor heating, solar heating and other circulation circuits.

Will this pump increase my shower or tap pressure?

No. This is a circulation pump, not a domestic pressure booster. If you need to improve water pressure at taps or showers, a suitable UPA pressure booster may be more appropriate.

Why does it have three speeds?

The three speed settings allow the pump's circulation performance to be adjusted to suit the requirements of the system.

Can the UPS20-60 be installed in any position?

No. The pump must be installed with the motor shaft horizontal, regardless of whether the pipework runs vertically or horizontally.

IMPORTANT INSTALLATION WARNING: Installing the pump with the motor shaft vertical can cause extremely rapid pump failure, potentially almost immediately after startup. Correct installation orientation is essential.

Always follow the manufacturer's installation instructions and the indicated direction of water flow.

Are replacement parts available?

Yes, parts are available — contact us for availability.

Need Help Choosing?

Not sure whether the UPS20-60 is suitable for your heating or hot water system? Contact us for straightforward advice.