3" Submersible Borehole Pump for Bores greater than 3" in diameter. The bore must have sufficient clearance around the pump for immersion in the water to allow it to cool the pump and motor.

Submersible pump to supply water from wells, bores, reservoirs, tanks, to be used for pressure systems, irrigations, water transfer.

The C3S series are 3” bore pumps, featuring an ultra-high energy efficiency permanent magnet motor that delivers exceptional performance with minimal energy consumption, along with an incorporated non-return check valve to prevent backflow efficiently. These pumps have multiple built in features such as run dry protection and more. These pumps also feature built in soft start to reduce energy consumption and reduce twisting of the pump on startup. With erosion resistant impellers and a water-cooled, shielded motor, it ensures reliable continuous operation.

Technical Information

Features

• Stainless-steel outlet and outer casing
• Comes with 1.5m of cable
• Maximum starts per hour: 30
• Maximum immersion: 150m
• Built in run dry protection
• Built in over voltage / under voltage protection
• Built in overload protection
• Built in over temperature protection
• Factory filled with anti-freezing liquid, frost proof to -20°C
• Max 70m Head
• 60 Litres per minute

Dimensions:

715mm Length x 75mm Diameter

See the Performance Curve in the photos.  This pump is shown on the Red Line.

Operation Parameters

• Minimum well diameter: 3”/80mm
• Maximum water temperature: 55°C
• pH: 5.0-9.0
• IP68 motor protection
• Insulation: Class F
• RPM: 8000
  

 1 Year Manufacturing Defect Warranty  View Warranty Terms here.